Accessories and precooling
- To pre-cool the milk with water
- Bolted, single-wall plate exchanger for pre-cooling of the milk
- Cooling capacity from 35°C to ± 20°C milk temperature at max.10°C water temperature and sufficient water volume
- Material stainless steel 1.4301
- Plate thickness 0.4 mm / Seal NBR (P)
- Milk connections 33 mm
- Water connections 1" BSP
- Plate cooler with 31 plates
⇒Cools 1900 l/h milk with 3800 l/h water
- Plate cooler with 37 plates
⇒Cools 2350 l/h milk with 4700 l/h water
- Plate cooler with 55 plates
⇒Cools 3650 l/h milk with 7300 l/h water
- Operation with well or tap water
Special - tube cooler in a stainless steel housing for 1 to 2 milking boxes
➔ Cooling water temperature: 10 °C
➔ Cooling water quantity: 300 l /h
➔ Milk flow rate: 300 l / h
➔ Milk inlet temperature: 35°C
➔ Milk outlet temperature: 20°C
➔ Water inlet: 3/4" pipe thread
➔ Water outlet: 3/4" pipe thread
➔ Milk enema:
Milk screw connection NW 25 conical socket with union nut ( without counterpart )
➔ Milk outlet:
Milk screw fitting NW 25 conical socket with union nut ( without counterpart
➔ Mounting directly on the milking robot
Dimensions
Diameter: approx. 333 mm
Height: approx. 750 mm
The precooler is suitable to preheat the drinking water for the cows
efficient - economical - user-friendly
- Stainless steel tank (storage tank, not cooled, without stirrer)
- Unobjectionable
- Optimal container shape
- Container sizes from 150 l to 310 l
- Inlet - outlet in NW 25
- 3 welded legs à 450 mm
- Cover with toggle latches and cover gasket
- Ventilation mushroom on the lid (not shown)
- Rinse water connection
- The cleaning of the buffer tank is done with the cleaning of the robot
- Integrated in the cleaning circuit of the milking robot
- OPTIONAL : With bottom filling
- OPTIONAL : Tank with stirrer motor and cooling system
- Extension module for alarm transmission in case of malfunctions
- For tank monitors and industrial cooling systems with alarm output
- Alarm output via SMS
- Up to 5 receivers can be stored
- SIM card not included
- Function test via test switch possible at any time
- Interface RS232
- Optional with RS232 USB adapter
