Yard container, model BI

Ideal for small quantities of milk

• Double-walled, insulated containers from 60 l to 750 l, with outlet in NW 40 from 250 l

• 3-wall tank for ice water cooling from 250 l to 565 l

• Various lid designs for all farm containers

• Extremely simple operation and cooling of the milk using an immersion cooler

• Cylindrical immersion coolers from 0.3 HP to 1.5 HP

• Ring type immersion coolers from 1 HP to 2 HP

• Transport trolleys for yard containers in various designs

• All farm tanks and coolers in stainless steel

The shapely ETSCHEID farm containers are double-walled, made entirely of chromium-nickel steel, with CFC-free insulation. They have no reinforcement rings and are therefore easy to clean.

The lid is available with one or two openings: for the immersion cooler, for manual milk extraction or the milk inlet plate. The milk inlet bend is welded to the lid with an opening as standard.

The cover is fastened with toggle-lever locks. Lids with hinges are also available on request from BI 250.

Inhalt LiterInnenhöhe2 Gemelke4 Gemelke
60520TZ 03TZ 03
85745TZ 03TZ 03
100520TZ 1TZ 03
150745TZ 13TZ 1
190745TZ 13TZ 1
250745TZ 20TZ 13
290845TZ 20TZ 13
330945TZ 20TZ 13
315745TZ 20TZ 13
365845TZ 20TZ 13
415945TZ 20TZ 13
440745-TZ 13
510845-TZ 13
580945-TZ 20
565745-TZR 33
650845-TZ 20
750945-TZ 20

Immersion coolers, model TZ and model TZR

The ETSCHEID rapid immersion cooler is the ideal device for smaller milk producers. It has been tried and tested 10,000 times, is future-proof and works extremely economically. The gentle agitator is exemplary. The stirrer lifts the milk gently and without eddying from the inside over the heat sink, baffles are not required. The temperature probe is located deep inside, providing accurate and direct control and avoiding damage to the probe when the immersion chiller is submerged. Even the smallest quantities of milk are perfectly chilled: without churning, without frothing and without changing the fat. Thanks to the agitator coupling, the agitator axis can be removed with one hand and without tools. This enables easy and reliable cleaning.
On request, immersion coolers can also be supplied with a ring evaporator (type TZR) (recommended from BI 250). Very good mixing is achieved in large containers, even with a slow-running agitator. All immersion coolers are delivered ready for connection and are extremely easy to operate with selector switches.

TypLeistung in kW - PSKühlleistung bei 25°C Raumtemperatur nach DIN EN 13732 
1. Gemelk 1.+ 2. Gemelk
von 35°C auf 4°C l/Std.von 19,5°C auf 4°C l/Std.
TZ 030,25 kW – 0,33 PS30 l Milch50 l Milch
TZ 10,7 kW – 1,0 PS70 l Milch120 l Milch
TZ 1/130,9 kW – 1,2 PS70 l Milch120 l Milch
TZ 20-11,1 kW – 1,5 PS105 l Milch160 l Milch
TZ 20-31,1 kW – 1,5 PS105 l Milch160 l Milch

 TypLeistung in kW - PSKühlleistung bei 25°C Raumtemperatur nach DIN EN 13732 
1. Gemelk 1.+2. Gemelk
von 35°C auf 4°C l/Std.von 19,5°C auf 4°C l/Std.
TZR 10,7 kW – 1,0 PS70 l Milch120 l Milch
TZR 130,9 kW – 1,2 PS70 l Milch120 l Milch
TZR 20-11,1 kW – 1,5 PS105 l Milch160 l Milch
TZR 20-31,1 kW – 1,5 PS105 l Milch160 l Milch
TZR 331,5 kW – 2,0 PS125 l Milch190 l Milch